Lorell 99550 Instructions D'assemblage page 2

Assembly Instructions
STEP 2
Tool: 4mm Allen key Wrench
Parts: M6X10 4 pcs
IMPORTANT NOTE:
• Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
• Check to be sure that you have all parts and hardware.
• Remove all wrapping materials, including staples and packing straps before you start to assemble.
• Don't tighten all screws/bolts until all completely assembled.
• Keep all hardware parts out of reach of children.
• It is recommended for 2 persons to complete this assembly.
CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY.
SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR!
STEP 3
≤ 22 lbs
(≤ 10kg)
Attention:
Tool "G" (13 mm spanner) is used for
tightening Part B to computer screen.
If computer screen is loose, remove
plastic cover and tighten it.
Dual Monitor Arm
≤ 22 lbs
(≤ 10kg)
G
Two people are required to
assemble and move this model.
99550