Lorell 99550 Instructions D'assemblage

Assembly Instructions
A B
Mounting Bracket Monitor Rail Assembly
1 Pc 1 Pc
STEP 1
D
A
B
NOTE:
Make sure the opening of "Up" is facing upwards.
Set part "A" (Mounting bracket) use drawing on the left to assemble the arm at a lower height.
Set part "A" (Mounting bracket) use drawing on the right to assemble the arm at a higher height.
IMPORTANT NOTE:
• Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
• Check to be sure that you have all parts and hardware.
• Remove all wrapping materials, including staples and packing straps before you start to assemble.
• Don't tighten all screws/bolts until all completely assembled.
• Keep all hardware parts out of reach of children.
• It is recommended for 2 persons to complete this assembly.
C D
M6 x 13
3 Pcs
F
C
E
G
E
M6 Nut 4mm Allen Key
3 Pcs 1 Pc
Rotate bracket like
this to increase the
height of monitors
Dual Monitor Arm
F G
10mm spanner 13mm spanner
1 Pc 1 Pc
H
Screen screw
2 Bags
Customer can assemble computer
screen to bracket with "H" bag
screws.
99550
H
Screen Screw
2 Bags
Two people are required to
assemble and move this model.