LF Portfolio 0131372 Mode D'emploi page 5

ASSEMBLY INSTRUCTIONS
3. Mounting surface should be clean, dry, flat
and 1/4 in. larger than the canopy (A) on all
sides. Any gaps between the mounting
surface and canopy (A) exceeding 3/16 in.
should be corrected as required With silicone
caulking compound (not included). Caulk
completely around where back of canopy (A)
meets the wall surface to prevent water from
seeping into outlet box.
4. Pass canopy (A) over the long machine
screws (DD) protruding from the mounting
bracket (B) and then secure with threaded
knobs (CC).
Hardware Used
Threaded
CC
Knob
5. Insert bulb (not included) into socket (D).
Use 100-watt max. medium-base
incandescent bulb or a CFL equivalent.
3
4
x 2
5
5
A
DD
B
A
D
Lowes.com/portfolio
CC