LUND Ventvisor Elite Instructions D'installation

For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
• CAUTION - Before driving, ensure that the vent visor is properly secured to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
Contents - 2 Piece Set
Front Driver
Side Visor
Contents - 4 Piece Set
Front Driver
Side Visor
Tools Required
Preparation Before Painting / Installation
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.
Installation Steps
Roll down window. Buff the inside felt surface
with scotch brite pad. Then clean with alcohol
clean
1
NOTE: visors mount on the inside of the window
Installation Instructions
Ventvisor Elite
NOTE: Actual product may vary from illustration.
Front Passenger
Side Visor
Front Passenger
Side Visor
Car Wash Supplies
NOTE: Actual application may vary slightly from illustrations.
pad.
inside of vehicle
channel.
™
Rear Driver Rear Passenger
Side Visor Side Visor
Clean Towel
Peel back 2" of tape line from each end of top flange.
top flange
2
Page 1 of 2
I - Sheet Number LV937 Rev.B
Alcohol Pad x2 Scotch Brite
Alcohol Pad x4
free end
front
flange
Pad
Scotch Brite
Pad
rear
flange