Troubleshooting Guide - JUST PERFECTO JL-17 Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3.
Empty the dust from the dust cup container.
4.
Rinse the dust cup filter in cold water, and then let it air dry for 24 hours before replacing it back in
the dust cup container.
Important Note:
DO NOT use a washing machine to clean the dust cup filter. Do not use a hair
dryer to dry it.
AIR DRY ONLY.
5.
Replace the dust cup filter carefully into the dust cup compartment. NEVER operate the vacuum
cleaner without the dust cup filter in place.
6.
Attach the dust cup container to the main body of the unit.
Note:
It is recommended that the dust cup filter be replaced every three (3) months (depending on
usage) to ensure peak performance of the unit.
Troubleshooting
PROBLEM
VACUUM WILL NOT OPERATE
VACUUM WILL NOT PICK-UP
OR SUCTION POWER IS
WEAK
DUST ESCAPING FROM
VACUUM
Ordering Replacement Dust Cup Filters
Please Note:
The Dust Cup Filter is washable. It should, however, be replaced every three (3) months (depending
on usage) to ensure peak performance of your vacuum.
Important:
Make sure that ALL filters are completely dry before re-installing back in the vacuum.

TROUBLESHOOTING GUIDE

POSSIBLE REASON
1. No power in electrical outlet
supplying transformer.
1. Dust cup container is full.
2. Dust cup filter needs
cleaning or replacement.
1. Dust cup container is full.
2. Dust cup filter is not
installed correctly.
3. Puncture/hole in dust cup
filter.
6
POSSIBLE SOLUTION
1. Check fuse or breaker.
Replace fuse/reset breaker.
1. Empty dust cup container
2. Remove dust cup filter and
check for object(s) in air duct
and remove. Clean or replace
dust cup filter.
1. Empty dust cup container.
2. Review dust cup filter
installation instructions.
3. Replace dust cup filter.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Jl-18

Table des Matières