Uberhaus 72255137 Guide De L'utilisateur page 15

10. Install the Roof Panels starting from left to right.
Slide #1 Roof Panel (1) into position. Then overlap #2 Roof Panel (2) as shown and
slide #2 Roof Panel (2) into position.
Attach #1 Roof Panel (1) and #2 Roof Panel (2) to #3 Roof Supports (O1) with a Bolt
(W2) and Spacer (X).
Slide #3 Roof Panel (3) into position. Attach #3 Roof Panel (3) and #2 Roof Panel (2)
to #3 Roof Supports (O1) with a Bolt (W2) and Spacer (X).
Slide #4 Roof Panel (4) into position. Attach #4 Roof Panel (4) and #3 Roof Panel (3)
to the #4 Roof Supports (O2) with a Bolt (W2) and Spacer (X).
Slide #5 Roof Panel (5) into the position. Attach #5 Roof Panel (5) and #4 Roof Panel
(4) to #4 Roof Supports (O2) with a Bolt (W2) and Spacer (X).
Repeat on each side. See Fig.10
Tighten all bolts (W2).
P2
C
P2
D
R1
P1
W1
P1
W1
11. Attach #1 Roof Borders (P1) and #2 Roof Borders (P2) to the edge of the roof as
shown witha Bolt (W1). Attach the Short Bar Connector (R1) as shown with Bolt (W1).
See Fig.11 (Fig.11.1——Fig.11.2).