Winplus 689101 Directives D'utilisation Et D'entretien page 10

Power cord direction
Power cord slot is provided in the
back of power station. You may
choose either direction to route the
cord as needed.
Using the LED work lights
1. Switch the master power switch on.
2. Use your hand to flip the LED lights
to the desired position.
3. Turn on the LED work light with the
LED light switch. You can press
once to turn to low light setting.
Press the second time to turn to
high setting. Press once more
to turn off the light.
Using the Power Sockets
1. Ensure the power switches are off
and the red lights in the switches
are not illuminated
2. Plug your device in to the
power station
3. Switch the power switches on
4. When you have finished using the
device, turn the power switches off.
10
Power Switch for
4 standard size outlet
Individual Power Switch
for wide-spaced outlet