Use And Maintenance; Carbon Filters - Airzone ZAIRA INOX 90 Instructions Pour L'utilisation, L'entretien Et L'installation

USE AND MAINTENANCE

Before beginning any sort of cleaning and maintenance work, turn off the power of the downdraft by turning
the main switch to 0 (OFF).
Changing the light bulbs
LED Strip replacement should only be carried out by qualified technicians using only original spare parts.
Cleaning the hood
If the downdraft is stainless steel, use specific products and rags for satin stainless steel (non-abrasive and / or
corrosive detergents free of chlorine), ensuring to clean in the same direction as the satin finish.
Do not use aggressive products, chemical solvents or derivatives of oil distillates that could leave oily traces which
could cause oxidation and polymerization.
The manufacturer is not responsible for damage to the surface of the downdraft due to failure to respect
these instructions.
Cleaning the metal filters
The metal filters fitted in the downdraft should be washed
every 2-3 months depending on how much they are used,
using hot water and a non aggressive liquid detergent.
To gain access to the metal filters, pull out the hood then
lift and rotate the cover. After washing the filters, they
must be dried well and correctly replaced.

Carbon filters

The hood can be used with our professional carbon filters.
EN -18