Safety Information; Safety First; Specifications - Hydraulic Power Source - Burndy PATRIOT 81KFT Serie Instructions De Maintenance

For information only, contact:
BURNDY TOOL SERVICE CENTER
®
150 Burndy Road
Littleton, NH USA 03561
or call, toll free 1-800-426-8720
Additional or replacement manuals may be obtained free
of charge from the BURNDY

SAFETY INFORMATION

The above symbols are used to call your attention to
instructions concerning your personal safety. Look for
these symbols; read and follow the instructions that
accompany them. Failure to follow the safety information
provided can lead to serious personal injury or death.
SYMBOL
Read and follow the operator's manual
before using tool.
Wear eye protection and personal
protective equipment.
Tool Service Center.
®
MEANING
Hazards that, if not
avoided, will result in
severe injury or death.
Hazards that, if not
avoided, could result in
severe injury or death.
Hazards that, if not
avoided, could result
in minor or moderate
injury.

SAFETY FIRST

The information provided in this manual is
essential for the safe handling, operation,
and maintenance of the BURNDY
PATRIOT
®
understand, and follow these instructions
and ALL safety warnings and labels before
operating these tools.
• Only use these tools in accordance with the manufacturer's
specifications. Other use of these tools may lead to
serious personal injury or death.
Each employer shall instruct each employee and user in
the recognition and avoidance of unsafe working conditions
and the laws and regulations applicable to his/her work
environment to control or eliminate any hazards or other
exposure to illness or injury. Reference: US OSHA 29CFR
1910 et seq.
If a conflict arises between the material contained in this
manual, rules of the user, his/her employer or company,
and legal or industry guidelines the more stringent rules
take precedence and must be followed.
Observe and follow all other safety rules and regulations
for the job.
Safety is everyone's responsibility.
SPECIFICATIONS - HYDRAULIC
POWER SOURCE
The internal hydraulic power source achieves fluid
pressures in excess of 9,000 lb/in
operation. Do NOT disassemble this tool at any time.
Disassembly of this tool may result in severe personal
injury or tool damage, and will void the warranty.
The hydraulic power system is located internally within
the PATRIOT Crimper and is a non-field serviceable
®
item. If you suspect that your tool is not functioning
properly, please contact the BURNDY
Center at: 1-800-426-8720.
Series. The operator must read,
during normal
2
Tool Service
®
3
®