Appliance Description; Before First Use; Frying - Inventum GF635F Mode D'emploi

2

appliance description

1. Thermostat button with control light
2. Heating element
3. Lid with filter and window
4. Basket with handle
5. Exterior
6. Handle ­ exterior
7. Reservoir ­ enameled
8. Reset­button
9. Storage for power cord
10. Oil filter
3
before the first use
Before you use the appliance for the first time, please do as follows: Carefully unpack the appliance and remove all the packaging
material. Keep the material (plastic bags and cardboard) out of reach of children. Check the appliance after unpacking for any visible
damage, possible from transportation. Place the appliance on a stable and heat resistant surface.
Remove the lid and the basket. Take out the heating element with the oil filter by pulling it straight up and also remove the reservoir.
Clean the lid, the basket, the oil filter and the reservoir with warm soapy water. Dry the parts thoroughly. Make sure that the parts are
completely dry.
Wipe the exterior with a damp cloth and dry thoroughly. Assemble the fryer.
Fill the reservoir with liquid frying oil between the minimum and maximum level, approx. 3 liters or 4 liters, depending on the model.
Ensure that you don't add less than the minimum capacity or over the maximum capacity. Inside the reservoir you will find two lines
which indicate the minimum and maximum level.
Attention: this fryer may only be used with liquid frying oil. Never use hard fats.
The handle of the basket can be stored in the basket by folding it in. Squeeze the two handle wires together and push the
handle forwards over the locking clip.
Only store the handle when the oil is fully cooled down. Ensure the handle is folded back before operating the fryer again!
For the best result in a cool zone fryer, always fry without using the lid.
4

frying

Check that the voltage in your home corresponds with the
voltage printed on the bottom of the appliance.
Check if the handle is folded back and turn the fryer on by plugging it in. The red power indicator will light up.
Turn the thermostatbutton clockwise to the required temperature.
As soon as the desired temperature is reached, the green thermostatlamp lights up. The thermostat and the green thermostatlamp
will toggle on and off as the thermostat in the fryer maintains the correct temperature.
The fryer is now ready to use.
Add the desired quantity of food to the basket. Do not add too much food at one time (never more than 2/3).
1
7
2
3 8
9
4
5
10
6
English
11
•