Casselin CPASPMIP Mode D'emploi page 17

EN
Unplug the device
Let the device cool down
Clean the appliance after each use, including the grease collection tray.
Clean the device with warm water and a clean cloth after each use.
After cleaning, use a soft, dry cloth to polish and dry the device. All parts must
be dried.
Never use hard or abrasive material that could scratch the device and damage it. Do not use
of chlorine or derivative solution.
After each cleaning apply a vegetable oil on the surface of the plate.
Store the device in a dry place.
6.3 Safety instructions for the maintenance of the device
Daily check that the power cord is not damaged. Never use the appliance when the cord is damaged. If the
cord has any faults, it must be replaced by a qualified technician.
In the event of a fault, contact your dealer.
Any maintenance or repair work should only be carried out by a professional.
REMARK
In the event of a trip, unplug the appliance, let it cool down and contact your retailer. If the unit does not start,
check your power cord. The device must not be plugged into a power strip but directly into a wall socket. For
any other anomaly, contact your dealer.
REMARK
Waste from used devices: all used devices must, when disposed of, comply with the regulations in force in
their country*. It is imperative to make the device unusable before disposal by removing the power supply
cable.
* in terms of ecology and recycling