Table des Matières
Publicité
1- Preparation:
1. Confirm the device is powered on.
2. Confirm the device, smartphone and router are as close
to each other as possible.
3. Confirm the phone is connected to the WIFI router and to
the internet.
2- Pairing steps:
1. Open your app, tap the icon "+" on the top right corner of
"Devices" page, select the type of device you want to add.
2. Turn your recessed fixture's wall switch OFF/ON slowly 3
times until the recessed fixture flashes rapidly.
3. Choose the WIFI network and enter the correct password,
then tap "Confirm".
3- Note:
If all devices were not paired at the same time, repeat step
1 and 2.
QUICKSTART - PAIRING
Publicité
Table des Matières
