Publicité
Les langues disponibles
Les langues disponibles
Configuring the USB ports using the BIOS
You can enable or disable the front and rear USB .0 and USB .0 ports from the BIOS
Setup.
To.disable.or.enable.the.front.and.rear.USB.2.0.and.3.0.ports:
1.
Press <Delete> to enter the BIOS Setup at startup.
From the BIOS Setup screen, click Advanced > USB Configuration.
.
.
Select the USB port that you want to enable or enable.
4.
Press <Enter> to enable or disable the selected USB port.
Click Exit and select Save.Changes.&.Reset to save the changes made.
5.
Refer to Chapter 1 for the locations of the USB ports.
ASUS BM665(MD560), BM685, and BP65(SD560)
4
Publicité
