Sauder Storage Credenza 417653 Mode D'emploi page 8

Step 4
Flip the ENDS (A) over.
å
Turn four BLACK 9/16" FLAT HEAD SCREWS (32S) into
å
the ENDS (A) until the shoulders of the SCREWS rest on
the surfaces of the ENDS.
Slide the END MOLDINGS (M) onto the ENDS (A). Line
å
up the grooves in the MOLDINGS over the heads of the
SCREWS in the ENDS.
These edges
should be even.
Page 8
A
M
BLACK 9/16" FLAT HEAD SCREW
(4 used in this step)
417653
A
Shoulder
32S
Apply pressure with your hands
as you guide the MOLDINGS over
the SCREWS and onto the ENDS.
These edges
should be even.
M
M
www.sauder.com/services