Use; Sensitive Touches; Display; Residual Heat Indication - Electrum PA6040VTC Notice D'utilisation

USE

Sensitive touches

Your ceramic hob is equipped with electronic controls with sensitive touch keys. When your
finger touches the key, the corresponding command is activated. This activation is validated by
a control light, a letter or a number in the display and/or a "beep" sound.
Touch only one key on the same time.

Display

Display
0
1...9
E
A
H
L

Residual heat indication

After the switch-off of the hob, the heating zone is still hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zone may be touched safely.
When the residual heat indicator light is on,don't touch the heating zone and don't put any heat
sensitive object on them. There are risks of burn and fire.

STARTING UP THE APPLIANCE

Before using your new hob

Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent
which risks causing blue-tinted colour on the glass surface.

Starting-up

Start-up/ switch off the hob:
Action
To start
To stop
Designation
Zero
Power level
Error message
Heat accelerator
Residual heat
Locking
Control panel
Press key [ ]
Press key [ ]
33
Function
The heating zone is activated
Selection of the cooking level
Electronic failure
Automatic cooking
The heating zone is hot
The control panel is locked
Display
[ 0 ]
nothing or [ H ]