Before Using The Appliance; Care And Cleaning - Binatone HS-4180 Mode D'emploi

All manuals and user guides at all-guides.com
BEFORE USING
THE APPLIANCE
Wipe the case of the appliance and the work-
ing surface with slightly damp soft cloth.
Only use the appliance for styling dry hair.
To achieve the optimum effect use hair styling
products.
OPERATING INSTRUCTIONS
1. Plug the straightener into the mains electric-
ity supply and set the switch (4) in position "I".
The indicator light (3) will light up. Select the
heat setting with a help of the «min-max» switch
depending on the type of your hair and the
desired result. Allow the appliance to heat up
for 2 minutes.
2. Separate a small strand of hair and comb from the roots to the
end of the hair.
3. Insert the strand between plates (2) at the hair roots, tightly
press the plates together. Put your finger on the soft finger rest
(7) to simplify the straightening. Floating plates help to spread
the pressure evenly on the hair.
4. Smoothly and slowly glide the appliance down to the end of
the strand, straightening and smoothing it. If necessary, you
may repeat the straightening procedure. To keep the shape of
the finished hairdo longer, fix it with hair spray.
5. The appliance allows you to straighten the hair, or to flick the
ends of the hair in or out as well. To do this, it is necessary to tilt
the straightener outward and upward at the very end of a lock
of hair.

CARE AND CLEANING

1. Switch the appliance off by moving the switch
(4) to position "0", and then unplug it from the
wall outlet and wait until it completely cools
down.
2. Clean the case (1) and plates (2) with a soft,
lint free damp cloth. Do not allow water or any
other liquid get into the appliance.
3. If you are not going to use the appliance for some time, then
let it completely cool down, place it in the box and store in a
safe dry place out of reach of children.
6