Attaching The Cushion - Pioneer KURO KRP-TS01 Mode D'emploi

Attaching the Cushion

This part prevents reflection of the cables connected to the
back of the Pioneer display and television on the base cover.
Attach it after anchoring the base cover on a flat stable place.
In case of KRP-600A / KRP-600M (with side
speakers installed) / PDP-LX6090 / PDP-
LX6090H (with under speaker installed)
Attachment Procedure
1
Peel off one side of the double-stick tape on
the cushion and attach the cushion onto the
position in the bottom diagram.
• Be careful that the cushion does not catch on the pipe
insertion holes.
• Anchor it in place so that there are no gaps. If there is a gap,
the cushion may peel off.
2
After attaching the Pioneer television onto the
stand, attach the light-blocking pad onto the
position in the bottom diagram (PDP-LX00 /
PDP-LX00H only).
1
En