Publicité
Les langues disponibles
Les langues disponibles
6826350COM
Nightstand
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
1
Press CAM BOLT into hole.
3
Press parts together so CAM BOLT inserts
into edge hole.
littleseedskids.com
Before You Start
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Parts are labeled on the surface or edge of the part
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.
2
Press CAM LOCK into hole.
4
Using a screwdriver, turn the CAM LOCK clockwise to
lock the CAM LOCK and CAM BOLT into their holes
and fastening parts together.
8
Arrow to point towards end
hole in edge of part.
Publicité
