Cleaning & Maintenance - Amsta AMDES112E Notice D'utilisation

2. CONTINUOUS DRAINING
For continuous operation or unattended dehumidification, please connect the attached drain hose
to the unit. Condensate water can be automatically flow into a bucket or drain by gravity.
Set the unit in a horizontal surface and stable position.

Switch off the unit before operating.

Remove the plug of the water outlet opening, and keep it in safe area.
Securely and properly connect the drain hose and make sure it is

not kinked and clear of obstruction.
Place the outlet of hose over a drain or bucket and ensure that water

could freely flow out of the unit.
Do not submerge the end of hose into water,
otherwise it can cause "Air Lock" in the hose.
To avoid water spillage:
As the negative pressure of condensate drain pan is large, tilt the drain hose downward toward the floor.
It is appropriate that the degree of inclination should exceed 20 degrees.
Straighten the hose to avoid a trap existing in the hose.
CLEANING & MAINTENANCE
CLEANING THE AIR FILTER (every two weeks)
Dust collects on the filter and restricts the airflow. The restricted airflow reduces the efficiency of the
system and if it becomes blocked it can cause damage to the unit.
The air filter requires regular cleaning. The air filter is removable for easy cleaning. Do not operate
the unit without an air filter, or the evaporator may be contaminated.
1. Remove the filter frame and take off the filter.
2. Use a vacuum cleaner to gently absorb the dust on the
surface. If the filter is very dirty, wash it with water and a soft
detergent and dry it thoroughly afterwards.
EN-17