Publicité
25
Contact with live wires may cause fi re and electric shock. Damage to a gas pipeline may lead to an
explosion. Damage to the water mains results in major material damage and may cause electric shock.
11.2. When handling stone materials, work with an external dust extraction system. The use of a dust
collection system limits the health damage caused by the dust.
11.3. While working, hold the angle grinder fi rmly with both hands and hold a fi rm body position. With both
hands, the angle grinder is safer.
11.4. Provide the machined detail. A detail gripped with appropriate fi ttings or brackets is locked more fi rmly
and securely than if you hold it by hand.
11.5. Keep your workplace clean. Mixtures of diff erent materials are particularly dangerous. Fine castings of
light metals can self-ignite or explode.
11.6. Do not use any accessories that are not recommended by the manufacturer specifi cally for this power
tool. The fact that you can attach a particular tool or tool to the machine does not guarantee safe operation.
11.7. Never place your hands near rotating work tools.
11.8. Regularly clean the ventilation holes of your cordless machine.
11.9. Use only the recommended battery and charger.
11.10. To clean the cordless machine, use soft and dry cloth. Never use any solvent or alcohol.
12. Functional description and purpose of the cordless angle grinder.
The cordless angle grinder is a power tool powered by a battery. It is driven by a single-phase collector
motor whose torque is transmitted to the output shaft by means of a crown and a pinion. The cordless
angle grinder is designed for cutting and grinding materials such as stone and metal. The angle grinder is
designed for cutting, rough grinding and wire brushing on metal and stone surfaces without the use of water.
With special sanding accessories, the angle grinder can also be used for abrasive sanding. Power tools
with cordless, cordless power supply are especially suitable for work related to interior decoration, room
adaptation, and more.
When working on metal and stone, the grinding wheel should only be used when the safety guard is
installed!
It is not allowed to use the power tool for activities other than its intended purpose!
13. Noise and vibration data.
The noise and vibration values have been measured in accordance with EN 60745:
Sound pressure level: LpA = 85,06 dB (A) K = 3 dB (A)
Sound power level: LwA = 96,06 dB (A) K = 3 dB (A)
Vibration acceleration (handle): ah = 6,151 m / s2, error K = 1.5 m / s2
Vibration Acceleration Value / Additional Handle /: ah = 4,144 m / s2, error K = 1.5 m / s2
14. Preparation for work.
14.1. Use protective equipment.
14.1.1. Protective guard.
Install the safety casing of the grasping foot on the angle grinder. Adjust the position of the protective guard
according to the specifi c activity being performed. Install the protective guard so that it is protected from
sparks that run out of work.
14.1.2. An auxiliary / additional handle.
Use your angle grinder only with an auxiliary handle mounted. Wind the auxiliary handle depending on how
the machine is working on the left, top, or right of the head (3 positions).
14.2. Mounting of grinding tools.
When working, sanding and cutting discs are heavily heated, do not touch them until they have cooled.
Clean the shaft and all the parts you will mount. While tightening and releasing the tools, press the
button to lock the shaft of the angle grinder. Press the shaft locking button only when it is stationary.
Otherwise, the angle grinder may be damaged.
14.3. Disk for grinding or cutting.
Observe the permissible workpiece dimensions. The hole diameter must fi t on the centering fl ange foot. Do
not use adapters or reducers. When mounting diamond cutting discs, make sure that the arrow indicating
the direction of rotation matches the direction of rotation of the angle grinder. To lock discs for grinding or
cutting, screw the lock nut and tighten it with a special key. After installing the abrasive disc, make sure
that the disc is properly mounted and can rotate freely before turning on the angle grinder. Ensure that the
abrasive disc does not touch the protective casing or other details of angle grinder.
Publicité
