DJO Aircast AirSelect Standart Instructions page 3

4) DEFLATE AIRCELLS –
• To deflate aircells, turn the SELECTOR found on the right-side of the brace to the
proper aircell number (Fig. D).
Press and hold finger on small release button found on the top right-side of brace
•
(Fig. F).
• Deflate until pressure is comfortable.
NOTE: Deflate aircells before removing brace for proper fit when reapplying.
NOTE: Higher pressure provides more support when walking, lower
pressure is more comfortable when sitting or reclining. Pressure
can also be adjusted by tightening or loosening straps.
NOTE: The shell can be trimmed with a cast saw or cast scissors to accommodate
larger calves.
CLEANING INSTRUCTIONS:
THE FOAM LINER MAY BE HAND-WASHED IN 86°F/30°C WATER WITH MILD DETERGENT
AND AIR-DRIED. DO NOT PUT IN DRYER OR USE OTHER HEAT SOURCE TO DRY.
HIGH ALTITUDE:
AT HIGH ALTITUDES THE AIRCELLS WILL EXPAND BEYOND THEIR OPTIMAL LEVEL.
ADJUST AIRCELL PRESSURE BY TIGHTENING OR LOOSENING THE STRAPS.
WARRANTY:
DJO Global, LLC will repair or replace all or part of the unit and its accessories for
material or workmanship defects for a period of six months from the date of sale.
NOT MADE WITH NATURAL RUBBER LATEX.
MATERIAL COMPONENTS
Shell: POLYPROPYLENE
Front Panel: HIGH DENSITY POLYETHYLENE
Straps: NYLON
Inflation Pumps: THERMOPLASTIC POLYURETHANE
Liner: NYLON/POLYURETHANE/POLYESTER (OUTER/FOAM/INNER MESH)
Binding: POLYESTER
Outer Sole / Insole: EVA/RUBBER
Selector dial: NYLON
NOTICE: WHILE EVERY EFFORT HAS BEEN MADE IN STATE-OF-THE-ART TECHNIQUES TO OBTAIN THE MAXIMUM COMPATIBILITY OF
FUNCTION, STRENGTH, DURABILITY AND COMFORT, THERE IS NO GUARANTEE THAT INJURY WILL BE PREVENTED THROUGH THE
USE OF THIS PRODUCT.
3