AENO SM1 Mode D'emploi page 8

ENG The AENO Steam Mop is a domestic appliance designed for wet cleaning
of rooms, i.e. degreasing and dust removal from floors, tables, window sills,
carpets and other similar surfaces.
Model: ASM0001 (Plug Type E/F), ASM0001-UK (Plug Type G).
Specifications
Input voltage: 220–240 V AC, 50/60 Hz. Rated power: 1200.0 W. Water tank
capacity: 380 ml. Operating time (Full water tank): up to 38 min. Water
consumption: up to 27 g/min. Steam pressure: up to 3 bar. Steam temperature:
about +110 °C. Heating time: about 17 sec. Drying protection: Available.
Operating conditions: –5 °С to +40 °С. Dimensions (L×W×H): 251×146×1130 mm.
Package Contents
Mop assembly (See assembly drawing a):
❶ – Water tank, ❷ – Water tank plug, ❸ – Water filter cartridge, ❹ – Power
cord, ❺ – Water tank latch lock, ❻ – Steam mop body.
Set of brushes and covers:
❼ – Plastic scraper brush, ❽ – Metal scraper brush, ❾ – Round scraper brush
with cloth cover, ❿ – "Two-in-one" brush with retainer, foam pad and cloth
cover, ⓫ – Main brush, ⓬ – Cloth cover for carpets (large), ⓭ – Cloth cover for
carpets (small), ⓮ – Carpet glider.
Set of tubes and hoses:
⓯ – Extension tube (two pieces), ⓰ – Extension hose.
Accessories:
⓱ – Wall bracket with fasteners (3M tape and screw), ⓴ – Shoulder strap.
⓲ – Quick start guide, ⓳ – Warranty card, V – Descaling pin (use for descaling).
Limitations and Warnings
Do not use aggressive detergents to clean the steam mop and its components
and accessories. All brushes may be cleaned under warm running water, while
cloth covers and cleaners may also be laundered. Be careful when cleaning the
wire brush, as your hands may be injured.
aeno.com/documents 8