EasyGO FUSION Mode D'emploi page 9

In order to rotate the wheels, move up the lever
in the front part of the wheel. In order to lock the
wheels to move straight on, move the lever down
(fig. 7).
ASSEMBLY OF THE CANOPIES
In order to assembly the canopy of the rear seat on
the frame of the stroller, fasten the plastic clips at
the bottom of the canopy and assembly the upper
part of the canopy using velcros (fig. 8).
In order to assembly the canopy of the front seat,
insert its hooks on the handles on the stroller
frame (fig. 9).
ATTENTION! To prevent damaging it fold the
canopy before folding the pram. If the pram
remains folded for prolonged periods, it is
recommended to remove the canopy entirely in
order to avoid damaging its flexible elements.
ATTENTION! The canopy includes flexible plastic
elements and to prevent their deformation it should
not be exposed to temperatures exceeding 35 °C.
ATTACHING AND REMOVING THE SAFETY
BAR
The pram is equipped with a safety bar. To
mount it clip its catches into the slots on the pram
frame (fig. 10). To remove the safety bar press
the buttons on the handles and pull. No need to
remove the safety bar prior to folding the pram.
ATTENTION! The safety bar does not prevent a
child from falling out of the pram. The use of the
safety bar does not release from the requirement
to use safety belts.
SAFETY BELTS
WARNING! Always use the fastening system.
Both seats of the stroller are equipped with the
5-point safety belts. Use them as accurately as
possible.
EN
In order to fasten the 5-point safety belts, connect
the shoulder belts forks with the lap belts forks,
then insert them into the central buckle attached
to the crotch belt (fig. 11). Adjust the belts length
so that they fit to the body of the child, but do not
press.
In order to unfasten the belts, press the button on
the central buckle and disconnect the belts forks
(fig. 12).
The rear seat is designed for children aged from
0 to 36 months, and therefore the belts have the
adjustment system allows to adjust their length to
growth of a child under 6 months of age. In order
to adjust the belts for a child under 6 months of
age, shorten their length by leading the shoulder
and lap belts and the crotch belt by the loops
sewn-in the back seat.
NOTE! The rear seat must have the backrest set in
the supine position to allow a child under the age
of 6 months to lie there.
SAFETY BREAK
The stroller is equipped with a central safety break.
To engage the break press the bar at the back of
the rear suspension. To release it move the bar up
(fig. 13).
ATTENTION! The safety break should not be used
to slow the stroller down. It can only be used when
stationary.
ATTENTION! Never leave a child in the stroller
without the break activated.
BACKREST ADJUSTMENT
In order to lower the backrest, pull up the metal
lever on the rear of the backrest and set the
desired position (fig. 14). In order to raise the
backrest, push it up.
GUIDERAIL HEIGHT ADJUSTMENT
In order to adjust height of the guiderail, press the
9
round buttons in its upper part on both sides (fig.
15).
FOOT REST ADJUSTMENT
In order to lower the footrest, push the buttons on
both sides and set the right position (fig. 16). In
order to raise the footrest, push it up.
FOLDING THE STROLLER
Before folding the stroller, fold or completely
remove the canopies (fig. 17). Then pull the levers
on both sides of the stroller guilderail (fig. 18)
and push the guiderail forward, until the stroller is
completely folded. Secure the stroller with a plastic
hook to prevent from unintentional unfolding (fig.
19).