ExPelec Nicols PAR COB 630 Manuel D'utilisation page 10

Manuel d'utilisation
3. MENU
There are 4 buttons and 4 bit LED displays on the operation panel for choosing different working
modes, choosing certain working mode via pressing these buttons, and it shows up on the LED
display.
When power is on , the digital LED display works with red dots, when there is inputting DMX signal,
the dot will be shiny.
DMX address code setting: Press key "MENU", when the digital LED displays d001-d512, then press
"UP" or " Down", you can set the address code, the code ranges from 001-512.
IP code setting: Press key "MENU", when the digital LED display IP.01-IP.64, then press "UP" or
"DOWN", you can set the address code, the code ranges from 001-512.
D001-D512
Auxx- Au01→Color mixing 1
Auxx- Au02→Color mixing 2
Auxx- Au03→Color mixing 3
Auxx- Au04→Color mixing 4
Auxx- Au05→Color mixing 5
Auxx- Au06→Color mixing 6
Auxx- Au07→Color mixing 7
Auxx- Au08→Color mixing 8
Auxx- Au09→Color mixing 9
Auxx- Au10→Gradual Change
So01→Sound control jump change
So02→Sound control strobe
St00 -St00 →Auto Master without Strobe
-St01 →St16→Auto master strobe speed from slow to fast
SP00-SP16→Auto master Au01 Au09 Au10 speed from slow to fast.
R020-R255 →Red max brightness set
G020-G255→Green max brightness set
B020-B255→Blue max brightness set
DMX Mode
PAR COB 630
10