Remote Control Operation - Vente Unique VESUVIA Mode D'emploi

Before operating, please review the IMPORTANT SAFETY INFORMATION on Pages 2 and 3, and heed all
warnings.
Control Buttons
LED Display

Remote Control Operation

BUTTON
ON: Enables control panel functions and remote
control. Turns on flame effect.
OFF: Disables control panel functions and
remote control. Turns off flame effect.
POWER
TIMER button: Controls timer settings to turn off
fireplace at selected time.
Settings range from 1 hour to 8 hours.
TIMER
FLAME "-": Makes flame effect dimmer.
NOTE: Flame effect stays on until power button
is turned off. Flame effect must be on for heater
to turn on.
FLAME -
FLAME "+": Makes flame effect brighter.
NOTE: Flame effect stays on until power button
is turned off. Flame effect must be on for heater
to turn on.
FLAME +
15
FUNCTION
Remote Control
ACTION & INDICATION
1. Press once. LED Indicator light turns on.
Power turns on. All functions enabled.
2. Press again. Flame effect turns off. Power and
all functions turn off.
1. Press once. LED Indicator light turns on.
Timer is set to 1 hour.
2. Press again until desired setting is reached.
Indicator lights show setting.
1. Press once. LED Indicator light turns
on, Flame effect dimmer get ready to
adjust.
2. Press again until desired setting is reached.
Flame effect continues to get dimmer each time
button is pressed.
2. 1. Press once. LED Indicator light turns
on, Flame effect brighter get ready to
adjust.
2. Press again until desired setting is reached.
Flame effect continues to get brighter each
time button is pressed.