Maintenance Instructions; Moving And Storage Instructions; Specifications; Before Returning For Repairs - Schumacher Electric SP-200 Guide D'utilisation

Dispositif d'entretien de batterie solaire
Masquer les pouces Voir aussi pour SP-200:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

11. MAINTENANCE INSTRUCTIONS

11.1 After use and before performing
maintenance, unplug and disconnect
the solar battery maintainer (see
sections 6, 7 and 8).
11.2 Use a dry cloth to wipe all battery
corrosion and other dirt or oil from the
battery clips, cords and the solar panel.
11.3 The solar battery maintainer uses a glass
substrate; handle with care.

12. MOVING AND STORAGE INSTRUCTIONS

12.1 Store the solar battery maintainer
unplugged, in an upright position.
12.2 Store inside, in a cool, dry place.
12.3 Do not store the clips clipped together, on
or around metal, or clipped to cables.
12.4 If the solar battery maintainer is moved

13. SPECIFICATIONS

Peak power output .................................................................................................2.4 Watt
Tested under standard conditions ............................................. AM1.5, 100mW/cm
Optimum working voltage .......................................................................................17.50 V
Optimum working current ......................................................................................130 mAh
Operating temperature ........................................................-40° F–185° F (-40° C–85° C)

14. BEFORE RETURNING FOR REPAIRS

14.1 When a maintaining problem arises,
make certain that the battery is capable
of accepting a normal charge. Double
check all connections, the solar battery
maintainer clips for correct polarity and the
quality of the connections from the cables
to the clips and from the clips to the battery
system. The clips must be clean.
14.2 When a battery is very cold, partially
charged or sulfated, it will not draw the
For REPAIR OR RETURN, contact Customer Service at 1-800-621-5485. DO NOT SHIP
UNIT until you receive a RETURN MERCHANDISE AUTHORIZATION (RMA) number
from Customer Service at Schumacher Electric Corporation.
If these solutions do not eliminate the problem,
or for more information about troubleshooting,
contact customer service for assistance:
services@schumacherelectric.com
www.batterychargers.com
or call 1-800-621-5485
Monday-Friday 7:00
11.4 Always keep the glass surface clean
using a soft cloth in order to ensure its
maximum output.
11.5 Ensure that all of the solar battery
maintainer components are in place and
in good working condition, for example,
the plastic boots on the battery clips.
11.6 Servicing does not require opening the unit,
as there are no user-serviceable parts.
11.7 All other servicing should be performed by
qualified service personnel.
around the shop or transported to
another location, take care to avoid/
prevent damage to the cords, clips and
solar battery maintainer. Failure to do so
could result in personal injury or property
damage.
full rated amperes from the solar battery
maintainer. It is both dangerous and
damaging to a battery to force higher
amperage into it than it can effectively use
in recharging.
14.3 When an UNKNOWN OPERATING
PROBLEM arises, please read the
complete manual and call the customer
service number for information. This will
usually eliminate the need for return.
to 5:00
CST
am
pm
8
, 25°C
2

Publicité

Table des Matières
loading

Table des Matières