Samsung SC88 Serie Manuel D'utilisation page 14

troubleshooting
PROBLEM
Motor does not start
Suction force is gradually
decreasing
Cord does not rewind
fully
Vacuum cleaner does not
pick up dirt
Low or decreasing
suction
Body overheating
Static electicity discharge
14_ troubleshooting
SOLUTION
• Check cable, pulg and socket.
• Leave to cool.
• Check for blockage and remove.
• Pull the cord out 2-3m and push down the cord rewind
button.
• Check hose and replace if required.
•
ones.
•
instruction.
• Please decrease power suction.
• This can also occur when air in the room is very dry.
Please ventilate the room to air humidity become a normal.