Initial Start-Up - AVL DITEST MDS DRIVE 188 Manuel D'utilisation

AVL DiTEST MDS 188

Initial Start-up

2
2.1 Hardware
2.1.1 Charging the battery / Power supply operation
Open the cover (1).
Connect the power supply cord to the socket and insert the power plug into the power outlet.
For the charge state of the battery please note the LED
Fig. 2-1
2.1.2 Switching-on
Switch on the AVL DiTEST MDS DRIVE with the key
Shortly after switching-on the unit the user interface appears.
Fig. 2-2
User Manual
(1)
, description see page 1-2.
on/off.
17