Samsung HW-N950 Manuel D'utilisation page 21

06 CONNECTING A MOBILE DEVICE
Connecting via Bluetooth
When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of
cabling.
• You cannot connect more than one Bluetooth device at a time.
Bluetooth device
The initial connection
1. Press the PAIR button on the remote control to enter the "BT PAIRING" mode.
(OR)
a. Press the
"BT" changes to "BT READY" in a few seconds automatically if there is no Bluetooth device
connected to the Soundbar.
b. When "BT READY" appears, press and hold the
Soundbar for more than 5 seconds to display "BT PAIRING".
2. On your device, select "[AV] Samsung Soundbar Nxxx" from the list that appears.
• When the Soundbar is connected to the Bluetooth device, [Bluetooth Device Name] → "BT"
appears in the front display.
3. Play music files located on the device connected via Bluetooth through the Soundbar.
If the device fails to connect
• If a previously connected Soundbar (e.g. "[AV] Samsung Soundbar Nxxx") appears in the list, delete
it.
• Then repeat steps 1 and 2.
NOTE
• After you have connected the Soundbar to your mobile device the first time, use the "BT READY"
mode to reconnect. See Page 11 for details.
For more information about Bluetooth connections, refer to "Connecting a TV via
Bluetooth" on pages 10~ 11.
Top of the Soundbar
(Source) button on the top panel and then select "BT".
ENG - 17
OR
(Source) button on the top panel of the