Lock The Spray Gun Trigger; Unlock The Spray Gun Trigger; Change The Spray Tip - GreenWorks Pro BPS60B00 Manuel De L'utilisateur

8.2

LOCK THE SPRAY GUN TRIGGER

10
11
1. Press the trigger (11) and push forward the trigger
safety lock-out (10) to lock the gun trigger.
2. Release the spray gun trigger (11) to stop water flow
through the spray tip.
8.3 UNLOCK THE SPRAY GUN
TRIGGER
1. Pull backwards on the trigger safety lock-out (10) to
unlock the gun trigger.
English
8.4

CHANGE THE SPRAY TIP

8a 8b 8c
8
9
1. Insert any of the spray tips (8a - 8e) onto the spray
wand (9).
After changing the spray tip, if the angle of the spray
tip is not appropriate, adjust the joint between the gun
wand and the triggle handle and tighten it again.
9
8d 8e
WARNING
EN