Bellman & Symfon Maxi Pro Mode D'emploi page 5

Using Maxi for TV
listening
In order to stream the sound from your
TV, you need a Maxi Pro TV streamer,
see separate user manual for installation
instructions.
Listening to the TV
Turn on the TV, select a show and press the
Maxi Bluetooth selector (11) to hear the TV.
A second press could be needed if another
Bluetooth source also is connected.
Note: If you get a call during the show, the
sound from the TV will be muted, so you
can hear the caller's voice clearly. When
you hang up, the sound from the TV will
automatically come back.
Care and maintenance
Using the product
Note: Maxi Pro can produce high sound
levels. Please use with care. Increase the
volume level gradually to a comfortable
level. Exposure to high sound levels can
damage your hearing.
Ensure that small parts are kept out of reach
from children.
Operate the product in a dry environment
where the temperature is always between
0° and 35° C.
7
Automatic reconnection
Maxi will automatically reconnect to your
TV streamer as soon as it's within range, so
you can bring Maxi when you visit family
and friends without hassle.
Battery and charging
Maxi is equipped with a rechargeable bat-
tery that lasts for up to 70 hours. When the
battery indicator (8) starts to blink in red, it's
time to charge it, see Charge Maxi.
Attaching the clip
To attach the clip, place the clip against the
back cover and press firmly until it locks. To
remove it, pull the round handles out from
the sides.
Cleaning
Clean the product with a soft, lint-free cloth.
Avoid getting moisture in openings.
Service and warranty
If the product appears to be damaged
or doesn't function properly, follow the
instructions in this leaflet. If the product still
doesn't function as intended, contact your
local dealer for information on service and
warranty.
Troubleshooting
Most problems with Maxi Pro can be solved quickly by following the advice below.
If Try this
I can't get the units to pair via  Make sure that your Maxi is in microphone mode by
Bluetooth.
pressing the microphone selector (4). Try pairing the
units again by following the steps in the section Pairing.
Nothing happens when I press
 The batteries are depleted. Charge Maxi, see
the Maxi On/Off button.
The Maxi battery indicator is The battery level is low. Charge Maxi, see

blinking in red.
I hear no sound in my head- First, make sure the volume is at the required level.

phones, even though Maxi is Then, check that the headphone plug is properly
turned on. connected to the Maxi headphone jack (12).
 Increase the volume by pressing the
volume controls (6).
Connect the headphones to another device, like a

smart phone, and check if you hear any sound. If not,
the headphones may need to be replaced.
 If Bluetooth mode is selected, make sure that the TV
streamer or mobile phone is within range, paired and
streaming a sound.
I don't hear the mobile phone in
 Make sure Bluetooth is activated on your mobile
my headphones. phone and that it is paired with your Maxi, see
in the
I don't hear the sound of the TV Make sure the TV streamer is within range and paired

in my headphones. with your Maxi, see
listening
The sound from the TV or mobile Try to increase the volume on your TV or mobile

is too low, even though the Maxi phone instead.
volume is at the highest level.
I hear a high-pitched noise in my  Lower the volume or increase the distance between
headphones. Maxi and the headphones.
 Direct the Maxi microphone (9) away from you.
Maxi seems unresponsive/frozen.  Press and hold the On/Off button (3) for ten seconds
until Maxi turns off.
 Press the On/Off button for about one second to start
Maxi again.
Charge
Charge
on the Maxi
Pairing
Using Maxi with your mobile phone section.
Pairing in the Using Maxi for TV-
section.
Maxi.
Maxi.
EN
8