Efco AT900 Manuel D'utilisation Et D'entretien page 24

A
A1
B
12. Insert he corrugate tube Ø 30 for the
13. Fix the corrugate tube B Ø 30 with the
R
B
H
14. With the supplied spark plug spanner,
15. Unscrew and remove only the screw
24
exit of the powders and granular B in
the attachment A1 that is located in
the lower side of the tank A.
clamp R.
assemble the tank A and fix it on the
support by screwing the black plastic
threaded cap H (removed at point 10).
from the cover of the fan (exhaust
side) as shown in the picture.