empasa Klemm-Markise Instructions De Montage Et D'utilisation page 43

Attachment
Step 13:
Mark the screw holes on the upper two feet
and then carefully remove the clamp awning again.
Now pre-drill the marked points according to the mounting
material provided.
Use a drill bit that is appropriate for the substrate.
Step 14:
Insert the dowels 18 .
Now install the clamp awning again (see also Step 12) and
again align it evenly and in alignment with the drill holes.
Step 15:
Secure the clamp awning with the screws
Step 16:
Adjust the pitch angle:
Loosen the screws for the drop arms (do not unscrew) and
move the drop arms up or down until the desired angle of
pitch is reached.
Now tighten the screws again.
V1/2021-30314
19 .
18
19
18
19
43