Device Lay-Out - XD XCLUSIVE Ontario FSC Mode D'emploi

ENGLISH

Device Lay-out:

1. Wireless charging surface
2. Type-C in
3. USB out
4. Indicator light
Specification:
Input
Output
Wireless output
Important: only use included accessories or certified and tested accessories to
charge this device. Using third party accessories can influence the item safety.
Using the wireless charger:
• First plug the wireless charger using the included Type-C cable into the USB
• port of your wall adapter.
• Make sure your phone is compatible for wireless charging
• Put your wireless charging enabled device on the wireless charging surface
(1.)
• If your phone doesn't have wireless charging you can connect the USB cable
of your phone to one of the USB out ports (3.)
Note:
• Some phone cases may block the wireless charging
• Do not place other materials, like metal objects, magnets, and magnetic
stripe cards, between the mobile device and the wireless charger pad.
• Check your mobile device's battery percentage using the charging icon
displayed on the screen of your phone.
• When the mobile device is not placed on the charging surface accurately,
your mobile device may not charge properly.
• If you use the wireless charger in areas with weak network coverage, you
may lose your network reception.
• Please do not expose this device to moisture or heath sources
• This is not a toy, not suitable for children under the age of 7
5V/2A; 9V/1.67A
5V/1A ; 9V/1.1A
10W
1.
3.
2.
4.
Please remove the
protective film on the
wireless charger (1)
before use!