Team kalorik Raclette TKG RAC 1003 Consignes D'assemblage page 11

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
Fax +32 2 359 95 50
concerning the temperature of a certain surface it is always
preferable to protect oneself.
(*) Competent qualified electrician: after-sales department of the
producer or importer or any person who is qualified, approved and
competent to perform this kind of repairs in order to avoid all danger.
In case of need you should return the appliance to this electrician.
OPERATION
Before using your appliance for the first time, take away the packaging materials and
clean the pans and the grilling surface thoroughly with a damp cloth.
Hold the stone under running water (you can use a sponge to improve the cleaning).
Never use abrasive or cleaning products. Rinse thoroughly and let dry.
Before each use, oil the non-stick coated plate.
Place the polished side of the stone to the top. Make sure the stone and the grill-plate are
correctly placed on the base.
Oil the polished surface of the stone with a kitchen paper or with a small brush coated
with heat-resistant table oil (olive or groundnut oil). Let the oil penetrate the stone and
then take away the superfluous oil.
When it is first switched on, the heating element may smell and emit some smoke. This is
normal; the grease that may have adhered to the element during manufacture is burning
off. We therefore recommend that you heat up the appliance for about 10 minutes
without any food (ventilate the room during this period). This phenomenon will no more
occur in the future.
Always preheat the grill-plate during more or less 10 minutes and the stone during more or
less 25 minutes before using the appliance.
In order to prevent grease stains on your table cloth, don't forget to put another, easy-
washing cloth under your appliance.
To switch on your appliance, after having read and observed all important safeguards,
put the plug in an earthed power outlet and press the ON/OFF switch. The switch will light
up, indicating that the appliance is in operation.
Hint: When your appliance is warming up and the raclette pans are clean, you can put them
on the appliance to warm them up but never leave raclette pans that have already been
used in the appliance, as the food residues might burn.
IMPORTANT REMARKS
The stone is a natural product. Small fissures can appear during use. It is a normal
phenomenon not covered by the guarantee.
If the stone has been kept in a damp environment, heat it up slowly (2 to 3 hours) in an
oven at 100°C or let it two days at ambient temperature.
Avoid shocks when you move the stone. Also avoid thermal shocks.
Never place too large, too cold or frozen food on a hot stone.
Never sprinkle a hot stone with cold water, it could crack.
To avoid burns or fissures on the stone, never move a still hot stone.
Only place food on the stone. Never place heavy objects on it.
If you use soused meat, you have to know that the spices will penetrate the stone. This will
decolourise it and then give a taste to the grilled meat.
Copies of the I/B. Please reproduce them without any changes
except under special instruction from Team International BELGIUM.
The pages must be reproduced and folded in order to obtain a
booklet A5 (+/- 148.5 mm width x 210 mm height). When folding,
make sure you keep the good numbering when you turn the pages
of the I/B. Don't change the page numbering. Keep the language
integrity.
11
Assembly page 11/60
TKG RAC 1003 - 140403

Publicité

Table des Matières
loading

Table des Matières