Function Introduction - HITWAY BK7 Mode D'emploi

Product Function Diagram

Function Introduction:

(Picture 1)
1. Charging: Referring to picture 1, open the plastic cover of the lower charging port on the left side of the lower tube
of the frame, connect the charger to start charging, and when the indicator light of the charger changes from red to
green, it means it is fully charged.
2. Power on: Referring to picture 2, long press the "i" key to power on/off.
3. Headlights: Refer to picture 2, long press the "+" button to turn on/off the headlights.
4. Start: power-assisted riding, short press "+" to adjust to 1st gear after power on, step on the sprocket of the car,
and start the motor to assist. If motor assistance is not required, turn off the power or turn off the battery or set the
meter to 0.
English / German / French / Spanish / ltalian / Dutch / Polish
(Model:BK7) Product Function Diagram
(Picture2)
(2)
1. Front chain shifter
2. Display button
3. Display
4. Rear chain shifter
5. Brake lever
6. Handlebar grip
7. Handlebar
8. Headlight
9. Front fork
10. Tire
11. Disc brake
12. Wheel reflector
13. Disc brake system
14. Wheel hub
15. Front fender
16. Pedals
17. Sprocket
18. Front derailleur
19. Chain
20. Rear derailleur
21. 7-speed cassette
22. Motor
23. Rear fender
24. Taillight
25. Bike luggage carrier
26. Seat tube adjustment
quick release
27. Seat tube
28. Saddle