Daga PM-145 Manuel D'instructions page 17

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ENGLISH
PROBLEM
When pressing
the on/off button,
nothing appears on
the screen.
The pressure exerted
by the cuff is not
constant.
The reading is extre-
mely high or low.
The pulse reading is
too high or too low.
The batteries expire
quickly.
The following ap-
pears on-screen: Err
The following ap-
pears on-screen: Lo
• The batteries have
expired.
• The polarity with which
the batteries were placed
is not correct.
• The batteries are not
making proper contact.
Have you remained
stationary during this
process?
• Is the cuff at the same
height as the heart?
• Is the cuff placed
properly?
• Have you remained
stationary during this
process?
• Have you remained
stationary during this
process?
• Have you taken the
reading just after doing
physical exercise?
The batteries are faulty.
• Weak signal or pressure
has suddenly changed.
• An error has taken
place during inflation.
Low battery.
Solution
• Change the batteries with
new ones.
• Insert the batteries pro-
perly.
• Wipe the cavity where
the batteries sit with a dry
cloth.
Stay still and silent during
the reading.
• Make sure your posture is
correct during the reading.
• Position the cuff properly
(Fig. 1)
• Stay still and silent during
the reading.
• Keep still and silent
during the reading.
• Take the reading again
after 5 minutes of rest.
Use alkaline batteries from
well-known manufacturers.
• Ensure that the cuff is
well positioned and the air
tube properly fitted. Repeat
the reading.
• Stay still and silent during
the reading.
• Adjust the cuff so that it
fits better.
Replace the old batteries
with new ones.
17

Publicité

Table des Matières
loading

Produits Connexes pour Daga PM-145

Table des Matières