PRO-POINT 8987646 Mode D'emploi page 23

V1.0
Problem(s)
Saw blade
damages plastic
workpiece.
Saw blade
damages wood
workpiece.
Page 23
2-SPEED SLIDING MITER SAW
Possible Cause(s)
1. Friction from the
saw blade melts the
material at the cut
line.
2. Plastic is chipped or
cracked along the
cut line.
Saw blade is chipping
the wood.
Assistance available at www.princessauto.com or 1-800-665-8685
Suggested Solution(s)
1. Saw blade speed is too fast.
Reduce speed to slow heat
build-up during cut.
a. Pause between cuts to allow
saw blade to cool.
b. Use a saw blade with teeth
that are uniform in height
and shape. Also use blades
with a high-tooth count.
c. Install a no-melt saw blades
designed for cutting plastic.
2. Use a saw blade with teeth that
are uniform in height and shape.
Also use blades with a high
tooth-count.
1. Decrease the saw blade's tooth
size.
2. Reduce the saw's speed.
3. Increase the feed rate.
4. Sharpen or replace the saw
blade.
8987646