Trouble-Shooting; Disposal; Technical Specifications - SilverCrest SMZS 260 E3 Mode D'emploi

__RP93441_B2.book Seite 39 Freitag, 9. August 2013 9:29 09

9. Trouble-shooting

If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric shock!
Do not attempt to repair the device
yourself under any circumstances.
Fault
• Has the device been
No function • Check the connection.
• Is the top edge of the
• Switch off immediately,
Blade insert 6
does not rotate
or only rotates
with great diffi-
culty
Vessel 7 looks • This is normal and
cloudy due to
hard food
Possible causes/
Action
connected to the pow-
er supply?
working cover 4
clean?
pull out mains plug|2
and check:
- Blockage in the ves-
sel?
- Food too tough or
too hard?
- Device not assem-
bled correctly?
does not affect the
function.

10. Disposal

The symbol showing a wheel-
ie bin crossed through indi-
cates that the product requires
separate refuse collection in
the European Union. This ap-
plies to the product and all ac-
cessories marked with this
symbol. Products identified with this symbol
may not be discarded with normal household
waste, but must be taken to a collection point
for recycling electric and electronic applianc-
es. Recycling helps to reduce the consumption
of raw materials and protect the environment.
Packaging
When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.
11. Technical
specifications
SMZS 260 E3
Model:
Mains voltage: 220-240 V ~ 50/60 Hz
Protection class: II
Power rating: 260 W
Max. continu-
ous operation
(KB): 1 minute
Subject to technical modification.
39
GB