Before Use; Intended Use - aidapt VP159W Notice D'utilisation Et D'entretien

INTRODUCTION
Thank you for deciding to purchase the Pedal Exerciser from Aidapt. The Pedal
Exerciser is manufactured from the finest materials and components available,
when used correctly it is designed to give many years of reliable trouble-free
service.

BEFORE USE

Carefully remove all packaging. Avoid using any knives or other sharp
•
instruments as this may damage the surface of the product.
Check the product for any visible damage If you see any damage or
•
suspect a fault, do not use your product, but contact your supplier for
support.

INTENDED USE

The Pedal Exerciser enables both upper and lower body exercise from a seated
position, pedals can be moved forward or backwards and the resistance can be
adjusted with the top adjusting knob.
ASSEMBLY INSTRUCTIONS
1. Attach the feet to the main body as follows (Fig. 1):
a.
b. Attach with the screws provided, placing a washer under each
c.
2. Attach the pedal assembly to the main body as follows (Fig. 2):
a.
b. Place the screw through the hole, and attach a nut to the screw.
c.
d. Note that the nut is fitted with a nylon insert to prevent it from
Usage and Maintenance Instructions
Slide the narrow tube on the foot inside the tube of the main
body.
screw head.
Tighten with the Allen key provided.
Align the holes in the pedal assembly with the holes in the main
body.
Tighten the nut using the Allen key provided to hold the screw,
and the spanner provided to hold the nut.
coming loose, so some force will be required to tighten it.
6
Ver.4 08/2013 (2531)