Technical Data Sheet - DVO DV401 E-Media Mode D'emploi

DV401

Technical Data Sheet

MODULES SYSTEM FOR
Freestanding structure designed for the integration of multimedia devices, wiring and equipment necessary for commissioning.
AUDIOVISUAL
Each module consists of the following elements:
COMMUNICATION:
BACK PANEL:
Made of 25 mm thick wood conglomerate coated with white melamine, light grey, light oak, dark oak, tobacco oak, "Maroncelli" walnut,
umber or in 25mm thick MDF coated with black matt melamine, with 2 mm thick matching ABS edge.
Rounded corners, 80 mm radius. Standard levelling feet made of ABS 10 mm h., or 20 mm h. on demand, in case a better cooling of the
electronic parts it is needed. At the back panel a casing of bent metal sheet 1.5 mm thick painted white, aluminum or anthracite is attached; it is
prepared for wire management and for the fastening of monitor and webcam.
WORKTOP:
Available in height 74 cm or 107 cm.
It is made of 25 mm thick wood conglomerate coated with white melamine, light grey, light oak, dark oak, tobacco oak, "Maroncelli" walnut,
umber or in 25mm thick MDF coated with black matt melamine, with 2 mm thick matching ABS edge.
Trapezoidal shape with 2 rounded corners, 80 mm radius. The worktop is equipped with a central top-access with openable door on two sides to
permit the exit of the cables on the work surface.
UNDERTOP PEDESTAL:
Consist of three elements made of 25 mm thick wood conglomerate coated with white melamine, light grey, light oak, dark oak, tobacco oak,
"Maroncelli" walnut, umber or in 25mm thick MDF coated with black matt melamine, with 2 mm thick matching ABS edge. Standard
levelling feet made of ABS 10 mm H., or 20 mm H. on demand, in case a better cooling of the electronic parts it is needed.
Compartment inspectable by means of an "openable" fourth element (with the same features of the previous elements). Outlet lids in white
ABS. Inside the pedestal a bent metal sheet tray 15/10 mm thick, painted white or aluminium, it is provided for the ordered placement of
multimedia devices and wiring.
FASTENING PLATE:
It is possible to adapt the monitor-holder plate to the screen provided by the end-user, with specific indication.
HARDWARE E SOFTWARE:
On demand, the study and supply of hardware and software it is possible.
(Note: For more solutions of wire management, see pricelist DV300-Accessories).
NOTE: ALL METAL COMPONENTS ARE PAINTED WITH EPOXY POWDERS.
3