Fein ASCS4.8 Mode D'emploi page 16

en
16
Original Instructions for Cordless Screwdriver. en
Symbols, abbreviations and terms used.
Symbol, character
WARNING
Character Unit of measure,
international
U
V
n /min
0
n /min
1
M... Nm
inch
mm
Explanation
Do not touch the rotating parts of the power tool.
Observe the instructions in the text or graphic opposite!
Make sure to read the enclosed documents such as the Instruction Manual and the General
Safety Instructions.
Before commencing this working step, remove the battery from the power tool. Other-
wise there may be danger of injury caused by unintentional starting of the power tool.
Use eye protection during operation.
Do not charge damaged batteries.
Keep the battery away from fire. Protect the battery against heat, e. g., against continuous
intense sunlight.
Observe the information in the adjacent text!
Gripping surface
Confirms the conformity of the power tool with the directives of the European Commu-
nity.
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
Recycling symbol: designates recyclable materials
Worn out power tools and other electrotechnical and electrical products should be
sorted separately for environmental-friendly recycling.
Battery type
Audio signal switched on
Audio signal switched off
Low speed
High speed
Reduce torque
Increase torque
Unit of measure,
national
V
rpm
rpm
Nm
inch
mm
Explanation
DC voltage
No-load speed
Speed, full load
Torque (hard/soft screwdriving application)
Hexagon socket tool holder
Screw diameter