Vikan 9301 Manuel page 8

DK • EN • DE • FR • SE • RU •
Data
Min. Water pressure:
Max. Water pressure:
Max. temp.:
Viscosity (ability to flow):
Injector:
Container:
Combi gun:
Spray Nozzles:
Suction Hose:
Nozzle set:
Trouble Shooting:
Problem
1. The equipment
does to suck­up
the detergent:
2. Weak foaming:
Foam Cleaning MANUAL
2 bar at the end of the dosed chemical outflow hose.
6 bar (9305x) or 8 bar (9301x).
40°C for 9305x og 60°C for 9301x.
Max. 50 mPas/cSt.
93139 for 9305x or 93149 for 9301x.
1,4 L (9310x) or 2,5 L (9311x).
93209 or 93219 (Ergo).
Item no. 9350 (or 9352 and 9354 extra equipment).
Item no. 93175.
Item no. 9378.
Reason
a. Blocked filter in the suction hose.
b. Nozzle opening is blocked.
c. The water pressure is too low.
d. Mineral accumulation in the injector.
e. Blocked filter in the water tap
(low water flow).
f. The chemical is too thick.
a. Blocked filter on the water tap.
b. Too low water pressure.
Repair
a. Clean or replace.
b. Clean or replace the nozzle.
c. Minimum 2 bar (25PSI) at the
end of the water supply hose is
required.
d. Disconnect container, suction hose
and nozzle. Descale the parts by
soaking them in a mild descale
solution. Clean with lukewarm
water.
e. Clean or Replace the filter.
f. Choose a chemical with
max. 50 mPas/cSt.
a. Clean or Replace.
b. Minimum 2 bar (25 PSI) at the
end of the water supply hose is
required.