Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Dosing
To have the best performance and dosing, it is necessary to:
Have a water pressure of minimum 2 bar at the end of the water supply hose.
•
•
Choose the right nozzle on the chemical inlet side: See recommended concentration on
the label/data sheet for the chemical. On most foam cleaning chemicals, you can read
the information on the right mixture proportion on the packaging between chemicals and
water. E.g. it can be 1 decilitre to 10 litres of water, which can be explained as 1:100 or 1%
concentration. By choosing and inserting the right nozzle, the dosing can be adjusted to the
recommendations on the chemical.
Replacement of Nozzles
By replacement it is recommended to screw the nozzles in/out using a pair of tongs or the like.
The nozzle set contains the following:
Grey:
1:10 (10%)
Red:
1:16 (6,3%)
Light Brown:
1:23 (4,4%)
Brown:
1:45 (2,2%)
Lilac:
1:100 (1,0%)
Extra nozzle set can be ordered using item no. 9378.
Maintenance
•
The house coupling on the hose and foaming gun have to be greased regularly to maintain
the coupling ability on the equipment. The grease applied during mounting will be rinsed away
by the water flow and thus needs to be renewed.
•
When the foam application is finalized, it is important to rinse the injector with clean water to
avoid blocking of the nozzle. Screw the injector of the container and let it suck clean water
through the suction hose to enable hose, filter and nozzle to be rinsed for chemicals.
WARNING
Fill cleaning agents into the container. Never use chemical solutions through the Ergonomic
water gun, 93219 or Ergo Foam Sprayer, 9301x since this will damage the internal metal parts.
DK •
EN •
DE • FR • SE • RU •
Black:
1:12 (8,3%)
White:
1:18 (5,6%)
Green:
1:33 (3,0%)
Yellow:
1:57 (1,8%)
Pink:
1:250 (0,4%)
Foam Cleaning MANUAL
Beige:
1:14 (7,1%)
Blue:
1:21 (4,8%)
Orange:
1:40 (2,5%)
Turquoise:
1:71 (1,4%)
Transparent:
Plug
Publicité
Table des Matières
