WINIA WKBE-U6RC/DT Notice D'utilisation page 43

Semi-automatic time adjustment
(finishing time)
This function automatically starts the oven
so that cooking will finish at a set time. You
can set an end time of up to 10 hours after
the current time of day. Prepare the food for
cooking and put it in the oven.
1. Select the desired cooking function and
the temperature using the control knobs.
When the timer reaches zero, the oven
will switch off and an audible warning will
sound. The symbol "A" and
Turn both control knobs to the "0" position
and press any key on the timer to stop the
sound. The symbol will disappear and the
timer will switch back to manual function.
Full-automatic programming
This function is used to start cooking after
a certain period of time and for a certain
duration. A time of up to 10 hours after the
current time of day can be set. Prepare the
food for cooking and put it in the oven.
1. Select the desired cooking function and
the temperature using the control knobs.
2. Press "MODE" until
you see "end" and
symbol on the display
screen. "A" and the
current time of day will
flash.
3. Use the "+" and
"-" buttons to set the
desired finishing time.
4. The current time
will reappear on the
screen, the symbols
will
"A", and
remain illuminated.
will flash.
The operating time will be calculated and
the oven will automatically start so that
EN - 17
2. Press "MODE" until
you see "dur" and
symbol on the screen.
The symbol "A" will
flash.
3. Select the desired
cooking time period
using the "+" and "-"
keys.
4. The current time
will reappear on the
screen, the symbols
will
"A", and
remain illuminated.
5. Press "MODE" until
you see "end" and
symbol on the screen.
The time and the
symbols "A" and
flash.
6. Select the desired
finishing time using the
"+" and "-" keys.
7. Add the cooking
period to the current
time of day. You can
set a time of up to 23
hours and 59 minutes
after this.
8. The current time
will reappear on
the screen, and the
symbols "A",
and
will remain illuminated.
will