Helpful Tips; Cleaning & Maintenance; Recipes - Nostalgia Electrics LPF210 Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

As the beverage level decreases, it is advisable to refill the
Beverage Bowl and keep it at the maximum fill level for best results.
Make sure that unit is turned OFF before adding liquid.
The LIGHTED PARTY FOUNTAIN must remain level to ensure
proper flow of beverage. Be careful not to drop pieces of food
into the Beverage Bowl which would clog the flow of liquid.

HELPFUL TIPS

If the fountain is not flowing, check the plug to
make sure that it is secure in the outlet.
If the fountain is flowing unevenly, the unit is not level. Make sure that the unit is
on a level surface so that the liquid is being evenly distributed in the Tier Bowls.
If the flow is intermittent, interrupted or not flowing properly, check
to see if there are chunks of fruit or pulp in the Beverage Bowl of
the Lighted Base that may be clogging the flow of liquid.
If there is excessive splashing, make sure the Splash Guards are in place
in the first and second Tier Bowls and that they are securely attached to
the pegs. Make sure that the Extension Spouts are properly inserted.
In case of splashing, place fountain on waterproof surface or table
covering to protect furniture and to avoid staining of table cloth.
CLEANING & MAINTENANCE
To prolong the life of your LIGHTED PARTY FOUNTAIN be
sure to follow cleaning instructions after every use. Handwash
ONLY. Not recommended for the dishwasher.
1.
Make sure unit is unplugged before cleaning.
2.
Pour out any leftover beverage from the Beverage Bowl.
3.
To make cleaning of the LIGHTED PARTY FOUNTAIN
easier, carefully disassemble the fountain parts.
4.
Wash in warm, soapy water, rinse and dry.

RECIPES

For best results when making juice or punch:
Do not use juices with pulp such as: orange, lemon, lime and grapefruit.
Do not use carbonated drinks such as champagne, sparkling wine or
soda. Carbonation will prevent the fountain from flowing properly.
Always fill Beverage Bowl with non-carbonated drink.
Turn unit on after adding non-carbonated drink.
The clearer the liquid, the better the lights show.
7

Publicité

Table des Matières
loading

Table des Matières