Work Area; Personal Safety - Pro-Point 8369464 Manuel D'utilisation

V 3.0
Note: Keep this manual for the safety warnings, precautions and
operating, inspection and maintenance instructions. Note that
when this manual refers to a part number, it refers to the parts list.

WORK AREA

1. Operate in a safe work environment. Keep your work area
clean and well lit.
2. Keep anyone not wearing the appropriate safety equipment
away from the work area.
3. Minimize distractions in the work environment. Distractions
can cause you to lose control of the tool.
4. Store tool properly in a safe and dry location to prevent rust
or damage.
5. Always lock up tools and keep them out of the reach of
children.

PERSONAL SAFETY

CAUTION! Wear protective equipment approved by the Canadian
Standards Association (CSA) or American National Standards
Institute (ANSI) when using the tool.
1. Head Protection
a. Always wear impact safety goggles that provide front and
side protection for the eyes.
b. Wear the appropriate rated dust mask or respirator when
working around metal, wood and chemical dusts or mists.
c. Wear earplugs if the power tool or work environment is
noisy.
d. Wear a full-face shield if your work creates metal filings or
wood chips.
e. Wear a hard hat to protect your head from falling objects.
2. Gloves
a. The gloves should provide protection based on the work
materials.
b. Wear suitable gloves to reduce the effects of vibration.
4
2 Ton Jack Stands
For technical questions call 1-800-665-8685
8369464