Télécharger Imprimer la page

Publicité

Liens rapides

STOP
Read through ALL instructions before
commencing assembly.
If you have any questions about this
product or issues with assembly
contact the customer services help
line before returning this product
to the store.
CUSTOMER SERVICES HELP LINE NUMBER:
NUMÉRO DE L'ASSISTANCE CLIENT:
NUMERO DE SERVICIO DE ATENCION AL CLIENTE:
+44 (0) 333 320 0463 (UK)
AVF Group Ltd.
Hortonwood 30, Telford,
Shropshire, TF1 7YE, England
www.avfgroup.com
ARRETEZ
-VOUS
Lisez toutes les instructions avant de
débuter l'installation.
Si vous avez des questions sur ce
produit ou sur son installation,
contactez le service d'assistance
clientèle avant de renvoyer le
produit au magasin.
4 6 5 8 1 5
Lea todas las instrucciones antes de
empezar la instalación.
Si usted tiene alguna pregunta
acerca de este producto o
problemas con la instalación
contacte los servicios de ayuda al
cliente antes de devolver este
CUSTOMER SERVICES HELP LINE NUMBER:
NUMÉRO DE L'ASSISTANCE CLIENT:
NUMERO DE SERVICIO DE ATENCION AL CLIENTE:
1-800 667 0808 (USA)
AVF Group, Inc.
2775 Broadway, Cheektowaga,
Buffalo, New York, 14227, USA
r e v 0 2
ALTO
producto a la tienda.

Publicité

loading

Sommaire des Matières pour AVF Group 465815

  • Page 1 NUMERO DE SERVICIO DE ATENCION AL CLIENTE: NUMERO DE SERVICIO DE ATENCION AL CLIENTE: +44 (0) 333 320 0463 (UK) 1-800 667 0808 (USA) AVF Group Ltd. AVF Group, Inc. Hortonwood 30, Telford, 2775 Broadway, Cheektowaga, Buffalo, New York, 14227, USA...
  • Page 2: Important

    IMPORTANT INFORMATION! We advise that before starting the assembly of this product that you familiarise yourself with the instructions and the parts list in this leaflet. INFORMATIONS IMPORTANTES! Nous vous recommandons de vous familiariser avec ces instructions et la liste des pièces détachées contenues dans ce document avant de commencer l'assemblage de ce produit.
  • Page 3 Boxed Parts Tools Recommended Pièces empaquetées Outils recommandés Piezas en la Caja Herramientas recomendadas...
  • Page 4 Front Front Devant Devant Frente Frente Do not fully tighten part T until step 10 Ne serrez pas complètement la pièce T avant l'étape 10 No apriete totalmente la parte T hasta el paso 10...
  • Page 5 Do not fully tighten part T until step 10 Ne serrez pas complètement la pièce T avant l'étape 10 No apriete totalmente la parte T hasta el paso 10 Arrow / Flèche / Flecha Always ensure that the arrow on part R points towards the edge of the panel.
  • Page 6 Do not fully tighten Feet part T until step 10 Pieds Ne serrez pas complètement Pies la pièce T avant l'étape 10 No apriete totalmente la parte T hasta el paso 10...
  • Page 7 Do not fully tighten part T until step 10 Ne serrez pas complètement la pièce T avant l'étape 10 No apriete totalmente la parte T hasta el paso 10...
  • Page 8 Take care Do not over tighten Doors are optional Les portes sont optionnelles Faire attention Ne serrez pas trop fort Tenga cuidado Las puertas son opcionales No apriete demasiado Repeat for other door Recommencer pour l'autre porte Repetir para la otra puerta...
  • Page 9 Small adjustments maybe required to align the unit and doors (if used). To do this you can move panels A+B, C+B and D+E De légers ajustements pourront être requis pour aligner l'unité avec les portes (si utilisées). Pour ce faire, déplacez les panneaux A et B, C et B et D et E Es posible que se requieran pequeños ajustes para alinear la unidad y las puertas (si se utilizan).
  • Page 10 Panels L are optional Les paneaux L sont optionnels Los paneles L son opcionales Panels L are reversible Les panneaux L sont réversibles Los paneles L son reversibles...
  • Page 11 Bend Panel L into position Panneau courbé L en position Doble el Panel L en su posición...
  • Page 12 Optional Levelling Optionnel Ajustez le niveau Nivelación Opcional IMPORTANT / IMPORTANTES / IMPORTANTE Check all nuts and bolts from time to time. Vérifiez tous les écrous et les boulons de temps à autre. Compruebe todos los tornillos y tuercas de vez en cuando. FL602KIT If you are attaching column mount FL602KIT you will need to use the fixing types shown, for example...