oneConcept Duster Mode D'emploi page 12

EN
12
All manuals and user guides at all-guides.com
ASSEMBLY
1
Insert the HEPA filter into the
permanent filter. Turn clockwise
to the right until the HEPA filter is
firmly in place.
3
Now place the dust container on
the motor housing slightly to the
left. Turn clockwise until the parts
engage.
2
Now put the permanent filter in the
dust container.
The notch must fit on the dock.
4
Now insert the desired attachment
(suction base or crevice tool) into the
suction slot on the underside.