Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
• Always wear personal protective equipment (goggles, gloves, etc.) to
• Only water after charging.
• Do not use pump in an explosive environment.
• Do not use tank to pump flammable liquids (gasoline, fuel, oil, etc.)
• Read instructions in entirety before beginning the installation.
Assembly Instructions:
1.
Remove handle from box and assemble. Use lock pins to secure handle.
2.
Charge battery – See charging instructions on next page.
Operation with Direct Fill Link Instructions:
1.
Fill the tank with clean or deionized water through the lid on top of the tank. Turn the
power switch on the handle to "ON".
2.
Remove dust cap on watering system and insert the male connector on the watering
system into the female connector on the direct fill link.
3.
Squeeze the handle on the direct fill link to begin watering. You will see the flow indicator
start spinning.
4.
When the flow indicator stops spinning and all indicator eyes on top of the valves rise to
the top, release the handle and uncouple the connectors.
5.
Replace the dust cap on watering system. Never leave the tank connected after watering
6.
Turn off when all batteries have been watered.
Operation with Manual Gun Instructions:
1.
Fill the tank with clean or deionized water through the lid on top of the tank.
2.
Remove battery caps.
3.
Turn the power switch on the handle to "ON". Squeeze the handle on the manual gun to
clear any air in the hose, dispensing water back into tank until there is uninterrupted flow.
4.
Insert the nozzle into the battery cell to be filled. Squeeze the trigger until the shut-off
takes place. Release the trigger and gently tap the nozzle to prevent any drips.
5.
Remove the gun from the battery. Repeat until all cells are filled.
6.
When watering is complete, turn off the tank and replace battery caps.
protect yourself from sulfuric acid.
Instruction Manual for Part # NC5090PN,
NC5090P & NC5090PNMAN
Aqua Sub Jr.
Cart
™
Publicité
Table des Matières
